Showing posts with label polypropylene. Show all posts
Showing posts with label polypropylene. Show all posts

Tuesday, April 30, 2019

Non-Replaceable Modules in Whole-House Bosch Electric Tankless Water Heaters

The larger whole-house Bosch electric tankless water heaters now have non-replaceable black polymer modules inside.  The larger whole-house Bosch electric tankless water heaters used to have sealed copper canisters inside but if one of the elements went bad they could not be replaced.  The new Bosch whole-house electric tankless water heaters now have replaceable elements but the black polymer module is not replaceable.

You will want to make sure the location where the Bosch whole-house electric tankless water heater is installed is heated and the temperature never falls below freezing.  All freezes are NOT covered by the Bosch warranty.  These Bosch electric tankless water heaters do NOT have any built in freeze protection.

Below is a list of the Bosch whole-house electric tankless water heaters that have the new replaceable elements.

17 KW Units
Bosch Powerstar AE-115 (Poly) #45551701
Bosch Powerstar AE-115 (Tronic Style) #45551710
Powerstream Pro RP17PT (Poly)  #45551702
Bosch Tronic WH17 #45551721

27 KW Units
Bosch Powerstar AE-125 (Poly) #45557701
Bosch Powerstar AE-125 (Tronic Style) #45557710
Powerstream Pro RP27PT (Poly)  #45557702
Bosch Tronic WH27 #45557721

36 KW Units
Bosch Tronic 5000C WH36 #7736500680

For further questions or to purchase any replacement parts please call Global Protankless Supply at 866-289-4652.


Monday, January 7, 2019

Z-Flex Z-Dens 2" Concentric Horizontal & Vertical Vent Kits

Global Protankless Supply is now carrying the Z-Flex Z-Dens 2" Concentric Horizontal Kit (2ZDHK2) and also the Z-Dens 2" Concentric Vertical Kit (2ZDVK2).  The concentric horizontal and vertical vent kits are ULC-S636 listed polypropylene gas venting systems suitable for venting positive or negative pressure residential and commercial gas and oil fired Category II and IV condensing heating appliances with a maximum continuous flue gas temperature of 248°F (120°C).

There are several distinct advantages with the Z-Dens Concentric horizontal and vertical vent kits. This polypropylene piping is long lasting and easy to install as no cure time is required. Acidic flue gas condensate resistance provides a means of reducing boiler contamination. Lastly, in the event of expansion and contraction of the venting run, the Z-Flex Z-Dens venting eliminates the inherent dangers found with PVC/CPVC glued pipe joints.

Z-Flex Z-Dens 2" Concentric Horizontal Kit (2ZDHK2)

The Z-Flex Z-Dens 2" Concentric Horizontal Kit 2ZDHK2 comes with a concentric termination horizontal, adaptor collinear to concentric, 2 locking clamps & 2 Adaptors CPVC / PVC Coupling to PP.

Z-Flex Z-Dens 2" Concentric Vertical Kit (2ZDVK2)

The Z-Flex Z-Dens 2" Concentric Vertical Kit 2ZDVK2 comes with a concentric termination vertical, adaptor collinear to concentric, 2 locking clamps & 2 Adaptors CPVC / PVC Coupling to PP.
Global Protankless Supply also offer 2"/4" concentric venting straight pieces and elbows for additional vent length run.

The Z-Flex Z-Dens 2"/4" horizontal and vertical vent kits work well with the New Bosch Greentherm 9000 series gas tankless water heaters.  Please see the models listed below that work for the venting kits.

Bosch Greentherm T9900SEi 199
Bosch Greentherm T9900SE 199
Bosch Greentherm T9900SE 160
Bosch Greentherm T9800SE 199
Bosch Greentherm T9800SE 160

The Z-Dens 2"/4" Concentric Horizontal Vent Kit (2ZDHK2) is also available in 3"/4" (2ZDHK3) and 4"/6" (2ZDHK4).

The Z-Dens 2"/4" Concentric Vertical Vent Kit (2ZDVK2) is also available in 3"/4" (2ZDVK3) and 4"/6" (2ZDVK4).

For further questions please call Global Protankless Supply at 866-289-4652


Tuesday, August 30, 2016

Z-Flex Z-DENS Polypropylene Rigged & Flexible Venting Material

Global Protankless Supply is pleased to announce we are now carrying the Z-Flex, Z-DENS polypropylene venting.  Polypropylene (PP) is comprised of only 2 elements carbon & hydrogen and is made without the use of any toxic or carcinogenic materials, heavy metals or chlorides. PP has a higher maximum flue gas temperature limit (230°F) as compared to PVC (149°F) & CPVC
(194°F). PP is easily 100% recyclable where PVC & CPVC is not due to its chemical composition and various additives. Recent developments in flue systems for use with high efficiency heating appliances, combined with the increased familiarity of use and installer confidence in polypropylene venting systems, has led to the development and continuous improvement of the polypropylene Z-DENS system.
Designed and Tested Safe
Unlike most PVC and CPVC pipe:


  • Z-DENS is specifically designed, tested and listed as a vent system. 
  • Z-DENS is manufactured from environmentally safe and sustainable fire retardant polypropylene, offering superior performance. 
  • Z-DENS does not require explosive or toxic cleaners, primers or cements; eliminating the safety and health concerns associated with these products. 
  • Z-DENS Self-Sealing design does not require any curing time, significantly reducing installation times and allows immediate system start up
  • Z-DENS can be used to vent appliances in New York City where PVC is NOT PERMITTED.


  • Z-DENS is available in diameters 2” (60 mm), 3” (80 mm), 4” (110 mm), 5” (125 mm), 6” (160 mm) and 8” (200 mm). Z-DENS is also fully compatible with Z-DENS FLEXIBLE and Z-DENS CONCENTRIC making for a complete and safe flue gas system.

    For more information and pricing please contact Global Protankless Supply at 866-289-4652


    Wednesday, July 2, 2014

    Bosch Greentherm C1050ES & C950ES Venting Limitations

    The Bosch Greentherm C1050ES and the Bosch Greentherm C950ES gas tankless water heaters have minimum and maximum venting lengths for the exhaust and intake air.  Please review the specifications below for the two heaters and the size, material and lengths that can be used.

    Vent options
    The Greentherm C1050ES & C950ES must comply with the following material for exhaust and intake air.

    PP common vent
    PP twin pipe
    PVC schedule 40 ANSI/ASTM D1785
    PVC-DWV ANSI/ASTM D2665
    CPVC schedule 40 ANSI/ASTM F441
    ABS-DWV schedule ANSI/ASTM D2661

    The Greentherm C1050ES & C950ES have many different ways they can vent such as horizontal or vertical and can use different types of material for venting and intake air.  There is the Polypropylene up and out concentric vent kit, Polypropylene common vent system if you are cascading more than one unit and up to 4 units, PVC Concentric vent kit, you can do a twin pipe PVC vent, etc.




    Maximum vent lengths for exhaust, intake air and use of elbows  for the Greentherm C1050ES & C950ES are listed below:





    Wednesday, March 20, 2013

    New Greentherm PP Concentric up and out vent kit

    New for the Bosch Greentherm C 950 ES & C 1050 ES is the polypropylene concentric up-and-out venting kit consisting of the appliance adapter, a 90° elbow, and a termination. This is the simplest and quickest venting option possible for a condensing tankless unit. The outer metal pipe and the inner polypropylene pipe make it both lightweight and rigid. The termination is telescopic to allow for varying wall thicknesses.


    This new PP concentric up and out vent kit is approved for the New Green Therm C950ES & C1050ES tankless water heaters.  The PP concentric up and out vent kit is also approved for the Bosch Therm C950ES & C1050ES.  

    Before attaching the appliance adapter to the top of the heater, a second metal plate comes with the kit and would cover the other intake air hole.  Then you would want to remove the exhaust collar from the top middle of the heater and then attach the appliance adapter as this will enable the heater to exhaust to the outside and also take its combustion air down the outer side of the same hole.

    Bosch Greentherm PP concentric up and out vent kit (7738003210)

    The Greentherm models C 950 ES & C1050ES are also approved for PP twin-pipe venting systems. Availability of generic PP vent pipe has increased and systems are becoming more popular due to ease of installation.  The twin pipe installation would be used if the customer needed to go out a different area out the sidewall or through the roof and would need to take the combustion air from the outside also.