Showing posts with label boilers. Show all posts
Showing posts with label boilers. Show all posts

Thursday, December 8, 2016

Bosch Buderus SSB85/120/160 Stainless Steel Condensing Boilers

Global Protankless Supply is pleased to announce we are now stocking and selling the commercial Bosch Buderus stainless steel condensing boilers.  There are 3 different BTU size boilers for most heating applications, SSB85, SSB120 and the SSB160.  The commercial boilers range from BTU sizes of 85,000, 120,000 and 160,000 BTU's.  Bosch Buderus Stainless Steel Boilers referred to as SSB are condensing hot water boiler(s), suitable for direct venting with natural gas. The SSB(s) shall be field convertible to LP.
Boiler(s) shall utilize a plasma welded 316L single tube stainless steel heat exchanger and burner tube with high quality condensing heating surfaces and patented laser perforated design to diffuse flames consistently throughout the length of the burner tube. Boiler(s) shall be constructed, tested and labeled in accordance with ASME Section IV and shall bear the ASME stamp. Boilers shall be CSA approved for USA and Canada and have an applicable Canadian Registration Number.

Boiler(s) shall be equipped with an integrated controller that shall monitor and control all combustion process functions, control of the boiler water temperature to a value required by the connected components and shall display current water temperatures or fault conditions with changes in operation status. Boiler(s) are designed for large residential, commercial and light industrial applications. The SSB(s) have an energy efficiency of 96%.

For more information and to place an order please call Global Protankless Supply at 866-289-4652

Friday, July 15, 2016

Tuesday, July 12, 2016

Z-Flex 5" Diameter Single Wall Stainless Steel Venting

Global Pro Tankless Supply is now carrying the Z-Flex 5" diameter single wall stainless steel venting (AL29-4C).  The 5" stainless steel venting has a male end on one side and a female end on the other with a built in silicon gasket and clamp.  The 5" diameter stainless steel venting can be used for exhaust venting tankless water heaters, boilers and pool heaters.  Below is a list of the individual items available and part numbers.
List of available 5" Diameter Venting

Please call Global Pro Tankless Supply at 866-289-4652 for further questions or to place an order.




Wednesday, July 15, 2015

Bosch Greenstar Floor Standing (FS) Combi & Straight Boilers

Global Protankless Supply is pleased to announce the highly anticipated Greenstar Floor Standing (FS) series boilers. The Greenstar FS Boilers are fully modulating heat only or combi floor standing gas condensing boilers with many of the same features and customer benefits of the Greenstar wall boiler, with some additional innovations.

Installation has been simplified, with two new innovations:

  a. The Greenstar FS includes an integrated supply return manifold that can be field converted into a low loss header (LLH) to accommodate existing pipe work.

  b. All line and low voltage connections have been relocated into junction boxes on
  the back of the boiler for easier access and wiring.

Venting options have been expanded from PVC, CPVC, concentric & ridged PP to also include flexible PP venting. This provides a quick and easy venting solution for retrofit applications where the boiler and piping is not relocated.

The FW200 Weather Compensation Boiler Control (87182262150) is an optional accessory and is not included with the Greenstar Floor Standing Boilers. The New System Control (NSC), capable of controlling multiple zones, will be launched around the same time as the new Greenstar FS to provide a flexible heating combination.  Please call Global Protankless Supply at 866-289-4652 for further details and to place your order.





Wednesday, July 1, 2015

Global Pro Tankless Supply 4th of July Sale


Global Pro Tankless Supply is pleased to announce our 4th of July Sale that will be running from June 30th through July 6th 2015 at midnight ET. Everything will be marked way down for this special sale period.  Global Pro Tankless Supply will meet or beat any other authorized distributor's price as part of this promotion.  Global Pro Tankless Supply would need to verify the competitors discounted price either in e-mail or through a website.

Global Pro Tankless Supply will be knocking prices down on all our Bosch Gas tankless water heaters, electric tankless water heaters, Bosch Greenstar Boilers and Combi Boilers.  You can call us for an extra discount of $25 off for the Bosch Greentherm and Greenstar Boilers by referencing coupon code:  PRO2015.

We also have special July 4th sale pricing on our Humphrey gas lights & accessories, Danfoss electric in-floor heating mats, Z-Vent Stainless Steel Venting and Virgo water filtration systems.

Please feel free to e-mail us with questions at info@prowaterheatersupply.com  or call us at 866-289-4652. We are open 24-7 to assist you in selecting the best product for your needs.

Friday, March 13, 2015

Bosch Greenstar Intelligent Cascade Module (ICM) #7719003528


Bosch is always working on new ways to improve their products and has recently came out with an Intelligent Cascading Module (ICM) part #7719003528 for the Bosch Greenstar gas-fired wall-hung boilers.  The ICM modules are designed to control cascade systems.  A cascade system is a heating system where several smaller boilers are connected in parallel to achieve higher output.  The Bosch ICM modules are only suitable for controlling Bosch Greenstar boilers with BUS-enabled Heatronic 3 systems.
One Bosch ICM module can control up to 4 Greenstar boilers.  By conecting up to 4 ICM modules, up to 16 boilers can be linked to form a single cascade.  Depending on the heating system controls used, a cascade system with up to 4 or up to 16 boilers can be created.  The maximum number of boilers that can be connected and the number of ICM modules required for the different systems are shown in the table below.



Tuesday, November 4, 2014

Bosch Neutralizers for Condensing Boilers and Water Heaters


Bosch recently has started to carry the Condensate Neutralizers for all the Bosch condensing boilers and Bosch tankless water heaters.  Condensate Neutralizers are recommended on all condensing equipment and should be serviced annually. Currently we offer 6 different JJM condensate neutralizers that cover the entire product range from the smallest output of 57,000 BTU (16kW) to the largest of 5,443,000 BTU (1,550kW).


Below is a list of what condensate neutralizer to use for each Bosch condensing boiler and Bosch tankless water heater.

The JM-2C & JM-2C PLUS can be used for any boiler or tankless water heater up to 200,000 BTU.

The JM-6C must be used for the Bosch C1210ES/ESC as it is over 200,000 BTU

Please call us at 866-289-4652 for more information and pricing.

Friday, November 23, 2012

Bosch 345/450 ESR Tankless Recirculating Heaters


The gas tankless recirculating heaters, Bosch 345 ESR and the Bosch 450 ESR are temperature modulated and have electronic ignition.  The ESR stands for Electronic ignition, Sealed combustion and Recirculating.  These recirculating heaters are designed and approved for heating and recirculating potable water in conjunction with an indirect storage tank.

The 345/450 ESR are not approved or designed for closed loop heating applications.  The ESR units are not a tankless heater as they have no flow switch to respond to flow.  Instead it’s a recirculating water heater designed for tank loading applications.  When an AquaStat (not included) hooked up to a tank tells the ESR that water needs to be brought back up to temperature, the ESR will tell a circulator (not included) to turn on to create flow through the heater to reheat the water in the tank.   Please refer to the installation and applications manual. 

The Bosch 345 ESR recirculating heater is a 95K BTU unit and can deliver 3.5 GPM at a 45 degree rise.  Efficiency is 82%

The Bosch 450 ESR recirculating heater is a 120K BTU unit and can deliver 4.5 GPM at a 45 degree rise.  Efficiency is 81%

The temperature control range for both heaters can be set anywhere from 115°F (45°C) - 190°F (90°C)

The 345/450 ESR comes with a standard ¾” pressure relief valve. 

The 345/450 ESR has a special built-in freeze prevention cycle and is controlled by a sensor.  Freeze protection is always assured by the operation of the appliance.  If the primary NTC (temperature) sensor detects temperatures 9°F below the selected temperature, the appliance starts on minimum power until the sensor reads selected temperature.  In the case of minimum set point temperature then it will start at 41°F.  The use of non-potable additives like glycol is not approved.

The Bosch 345 ESR and the Bosch 450ESR must be installed indoors according to the provided installation manual.  The 345/450 ESR is NOT approved for outdoor installations. 

The Bosch 345/450 ESR recirculating heaters must be vented in accordance with the installation manual and require Category III 3” stainless steel sealed venting for the exhaust.  These heaters are direct vent units and must be vented directly to the outside in accordance with the installation manual.  These heaters cannot be combination vented with any other appliance.  The intake should be taken from the outside and 3”PVC or other material can be used only for the intake air.

The Bosch 345/450 ESR recirculating heaters are gas specific so they cannot be converted from one gas type to another.

Thursday, June 7, 2012

Greenstar Combi 100 & 151 Gas Fired Condensing Boilers

The New Bosch Greenstar Combi 100 (100K BTU) & Bosch Greenstar Combi 151 (151K BTU) Gas Fired Condensing Boilers are new to the American market but have been in use for years in Europe.  The combi 100 is 98.5% efficient as the combi 151 is 96.5% efficient.  The new Bosch Greenstar condensing boiler line is engineered to offer the ideal solution for residential heating and hot water needs at an affordable price, without compromising quality or fuel economy.

"Combi" (combination) unit with space heating and integrated water heating in one highly efficient, compact unit. With special insulation to ensure ultra quiet operation and the exclusive keypad safety lock feature to prevent unwanted tampering with heating controls, this unit is the ideal "green" unit.




  • Limited lifetime heat exchanger and 5-year parts & labor warranty
  • All models available as NG or LP
  • Special insulation ensures ultra-quiet operation
  • Compact dimensions and built-in frost protection offer flexibility for location of installation
  • ECO mode for energy saving fuel consumption
  • Exclusive safety feature - keypad safety lock prevents unwanted tampering with heating controls.


  • Each unit features an ASME approved Al-Si heat exchanger constructed of advanced Magnesium-Aluminum-Silicon alloy - offering increased flexibility versus traditional stainless steel. They are equipped with highly durable heating blocks that are corrosion resistant and designed to optimize clean burning combustion over an extra large surface area, which requires minimal servicing and reliance on spare parts during the boiler’s lifetime.  The Greenstar units come set for Natural Gas (NG) and there is a conversion kit that is included with the unit if it has to be converted to Liquid Propane (LP).

    The Greenstar Combi units are designed for heating such as radiant floor heat or baseboard heating with multiple zones depending on the size of the unit and also for domestic hot water (DHW).  

    The combi 100 unit besides being used for heating applications is also designed for DHW for 1 major application at a time - 72 degree rise at 2.4 gpm while the combi 151 could possibly do 2 applications at a time and will deliver - 72 degree rise at 4 gpm.

    Depending on the size of your home and the heating and DHW applications you are looking for, you would need to get an HVAC or gas technician to size the unit properly as they would have to factor in,  size of home, insulation "R" factor, windows, etc..

    Thursday, March 31, 2011

    Z-Flex Z-Vent Stainless Steel Vent Pipe

    The Bosch Therm 940ES and Bosch Therm 830ES tankless water heaters require either 3" or 4" single wall stainless steel venting.

    The Bosch Therm 940ES is a 199,000 BTU heater and the Bosch Therm 830ES is a 175,000 BTU heater. Read the manual carefully as these two heaters have been approved for longer runs using 4" Z-Flex stainless steel venting.

    At Pro Water Heater Supply we carry the full line up of Z-Flex Z-Vent 3" and 4" stainless steel vent pipe. This special single wall venting is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure.

    Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

    Z-Vent is available in up to 24" diameter and is also used to vent boilers.

    Global ProTankless Supply