Wednesday, March 20, 2013

New Greentherm PP Concentric up and out vent kit

New for the Bosch Greentherm C 950 ES & C 1050 ES is the polypropylene concentric up-and-out venting kit consisting of the appliance adapter, a 90° elbow, and a termination. This is the simplest and quickest venting option possible for a condensing tankless unit. The outer metal pipe and the inner polypropylene pipe make it both lightweight and rigid. The termination is telescopic to allow for varying wall thicknesses.


This new PP concentric up and out vent kit is approved for the New Green Therm C950ES & C1050ES tankless water heaters.  The PP concentric up and out vent kit is also approved for the Bosch Therm C950ES & C1050ES.  

Before attaching the appliance adapter to the top of the heater, a second metal plate comes with the kit and would cover the other intake air hole.  Then you would want to remove the exhaust collar from the top middle of the heater and then attach the appliance adapter as this will enable the heater to exhaust to the outside and also take its combustion air down the outer side of the same hole.

Bosch Greentherm PP concentric up and out vent kit (7738003210)

The Greentherm models C 950 ES & C1050ES are also approved for PP twin-pipe venting systems. Availability of generic PP vent pipe has increased and systems are becoming more popular due to ease of installation.  The twin pipe installation would be used if the customer needed to go out a different area out the sidewall or through the roof and would need to take the combustion air from the outside also.





Tuesday, March 19, 2013

PP Common Venting Systems for Cascaded Units


New for the Greentherm C 950 ES and C 1050 ES, and the Therm C 1210 ES and C 1210 ESC, is a common venting system of polypropylene pipe for up to four appliances. Offered in either a side by side or back to back configuration, the kits allow for a single vent pipe for all units. Combustion air must be taken from the room for multiple units common vented.  A 3" PVC 90 degree elbow would want to be placed on either the left or right air intake hole for the combustion air to keep anything from falling into the heater.  This is mandatory for commercial applications, with multiple units installed and that the multiple units are common vented with either the side by side or back to back venting option.  All other applications such as residential, single units, etc. must take the combustion air from the outside using 3" PVC or 3" dia PP pipe.  Please refer to the installation manual for the Bosch tankless water heater for the combustion air requirements for the heater.
 
Side by side with horizontal termination (left),
back to back with vertical termination (right)


The new polypropylene pipe (PP) common venting system features different kits for cascaded units of 2, 3 or 4 units.  Kits would have to be ordered as needed:

Kit A - side by side, units #1 & #2 (2 heaters) (7736501100)
Kit B - side by side, units #3 & #4 (1 heater) (7736501254)
Kit C - back to back, units #1 & #2 (2 heaters) (7736501253)
Kit D - Extension back to back, units #3 & #4 (2 heaters) (7736501252)

There are also additional 6" diameter PP venting pieces available.  There are additional:

Horizontal Termination Dia 6"  (7736501117)
Vertical Termination Dia 6"  (7736501119)
Extension rigid straight pipe 20" Dia 6"  (7736501137)
Extension rigid straight pipe 40" Dia 6"  (7736501135)
Extension rigid straight pipe 80" Dia 6"  (7736501133)
Rigid 90 degree elbow Dia 6"  (7736501132)

For example:
Say you were common venting and cascading 4 units side by side and venting up through the roof then you would want 1 - Kit A for units #1 & #2, 1 - Kit B for unit #3 and then 1 - Kit B for unit #4.  You would also then need 1 - 90 degree elbow, how many extra feet of extension straight pipe and then the vertical termination.



Tuesday, March 12, 2013

New Bosch Greentherm C 1050 ES Condensing Tankless Water Heater

The New Bosch Greentherm C 1050 ES Condensing tankless water heater is a top performance, fully condensing gas tankless water heater from Bosch. This 199,000 BTU heater is designed for residential or commercial applications and can deliver hot water up to 140 degrees F with a 10.5 GPM flow rate.  Not approved for space heating applications.
This Energy Star approved tankless water heater can produce enough hot water for 2-3 major applications in most homes or is good for most commercial applications.  The Greentherm C 1050 ES is now 94% energy efficient.

Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- well ahead of the 2012 Low NOX emissions standards set by SCAQMD (California -- South Coast Air Quality Management District).  The Greentherm C1050ES now has NSF Certification (National Sanitation Foundation) for commercial kitchens.  The Bosch Green Therm C1050ES now has an added bypass tube connecting the cold and hot water lines inside the unit so the heater can mix a little cold water with the hot to alleviate and fluctuations and maintain a more stable temperature.  Standard now also are three NTC temperature sensors. With a new sensor immediately after the HEX, the Greentherm achieves benchmark temperature control. The NTCs are no longer clipped on, but rather installed into the inlet and outlet pipes.


The Bosch Greentherm C 1050 ES features an electronic ignition system and can vent through either 3 inch or 4 inch diameter PVC vent pipe either through the side wall or up through the roof.  The Greentherm C950ES now takes a new concentric venting system and attaches right to the top of the heater and takes its intake air and exhaust out through one hole to the outside.  The Greentherm C1050ES can now be cascaded together with up to 4 units and they can all vent into one pipe using a special venting kit to the outside.  Installation can be done venting up to 4 units together into the one pipe having the heaters mounted side by side or back to back.  The combustion air for the units will need to be taken from the inside of the building.

The Bosch Greentherm C 1050 ES comes with built in freeze protection.  The Greentherm C1050ES also comes with an external water filter screen.  The Bosch Green Therm C1050ES does not come with a 3/4" pressure relief valve, this is an accessory that would have to be ordered separately.

The freeze prevention kit is designed to provide protection for the water heater down to approximately 5°F for short term conditions only. It will not protect the appliance in areas where the temperature is routinely expected to be below freezing.  The freeze prevention kit will not protect plumbing outside the appliance from freezing.

The Bosch Greentherm C 1050 ES comes with a limited 15 year warranty on the heat exchanger and 5 years on all other parts.  Service and labor costs are not covered.

New Bosch Greentherm C 950 ES Condensing Tankless Water Heater

The New Bosch Greentherm C 950 ES Condensing tankless water heater is a top performance, fully condensing gas tankless water heater from Bosch. This 175,000 BTU heater is designed for residential or commercial applications and can deliver hot water up to 140 degrees F with a 9.2 GPM flow rate.  Not approved for space heating applications.
This Energy Star approved tankless water heater can produce enough hot water for 2 major applications in most homes.  The Greentherm C 950 ES is now 93% energy efficient.

Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- well ahead of the 2012 Low NOX emissions standards set by SCAQMD (California -- South Coast Air Quality Management District).  The Greentherm C950ES now has NSF Certification (National Sanitation Foundation) for commercial kitchens.  The Bosch Green Therm C950ES now has an added bypass tube connecting the cold and hot water lines inside the unit so the heater can mix a little cold water with the hot to alleviate and fluctuations and maintan a more stable temperature.  Standard now also are three NTC temperature sensors. With a new sensor immediately after the HEX, the Greentherm achieves benchmark temperature control. The NTCs are no longer clipped on, but rather installed into the inlet and outlet pipes.


The Bosch Greentherm C 950 ES features an electronic ignition system and can vent through either 3 inch or 4 inch diameter PVC vent pipe either through the side wall or up through the roof.  The Greentherm C950ES now takes a new concentric venting system and attaches right to the top of the heater and takes its intake air and exhaust out through one hole to the outside.  The Greentherm C950ES can now be cascaded together with up to 4 units and they can all vent into one pipe using a special venting kit to the outside.  Installation can be done venting up to 4 units together into the one pipe having the heaters mounted side by side or back to back.  The combustion air for the units will need to be taken from the inside of the building.

The Bosch Greentherm C 950 ES comes with builtin freeze protection.  The Greentherm 950ES also comes with an external water filter screen.  The Bosch Greentherm C950ES does not come with a 3/4" pressure relief valve, this is an accessory that would have to be ordered seperately.

The freeze prevention kit is designed to provide protection for the water heater down to approximately 5°F for short term conditions only. It will not protect the appliance in areas where the temperature is routinely expected to be below freezing.  The freeze prevention kit will not protect plumbing outside the appliance from freezing.

The Bosch Greentherm C 950 ES comes with a limited 15 year warranty on the heat exchanger and 5 years on all other parts.  Service and labor costs are not covered
.

Thursday, February 28, 2013

New Bosch Tronic 3000T ES Mini-Tank Water Heaters

Bosch has rebranded the Ariston Pro Ti line of electric mini-tank water heaters. They are now labeled as Bosch Tronic 3000T ES Electric Mini-tank Water Heaters.


The old Ariston Pro Ti models GL2.5Ti & GL2.5TiS are now the Bosch ES 2.5.
The old Ariston Pro Ti models GL4Ti & GL4TiS are now the Bosch ES 4 .
The old Ariston Pro Ti models GL8Ti & GL8TiS are now the Bosch ES 8.

The new Bosch ES2.5, ES4 and ES8 electric mini-tank water heaters are the same size as the mini-tanks that each replaces.  The replacement parts for the new Bosch ES2.5, ES4 and ES8 are different now and will not work for the older Ariston GL2.5Ti, GL4Ti or the GL8Ti.

*  Please note that the new Bosch ES4 is not a direct replacement for the retail model Ariston GL4 as the Bosch ES4 is 13 1/2" in depth and the retail Ariston GL4 is 12 1/4" deep.

The new Bosch ES2.5, ES4 and ES8 have many new improvements since they have been upgraded. The mini tanks have a new temperature adjustment knob on the front of the unit to raise and lower the temperature from 65 Deg F to 145 Deg F. On the older models you would have to remove the grey oval cover to access the temperature control knob.

The Bosch ES2.5, ES4 and ES8 models have a new improved thermostat that features a new sensing probe that is attached to the thermostat and inserts into the cavity of the new heating element so the heater can adjust temperatures quicker and maintain a more consistent heat.

The new model ES8 now has to be hard wired to a plug for 110V.  Global Protankless Supply carries 6' cords for the Bosch ES8 heater.

See our web site at www.prowaterheatersupply.com for all the details.

Steve

Friday, January 25, 2013

Venting requirement for Bosch AQ4 Powervent kit

The Bosch AQ4 Powervent Kit with built-in freeze protection is designed for the Bosch Therm 520HN (Hydro Ignition) and 520PN (Pilot) tankless water heaters. This accessory allows the Bosch 520HN and 520PN tankless heaters to vent horizontally out the sidewall of the home.  The AQ4 does require power to operate and operates on 120V and comes with a 3' cord to plug into the outlet.  
  The AQ4 is a power vent kit and will allow a horizontal vent run of up to 25 feet with one elbow (subtract 5 feet for every elbow). This kit includes the power vent motor.  There is also a vent hood with damper that gets mounted on the outside of the home and this built in flapper prevents the cold air from coming in when the heater is not in use.  Please make sure to refer to the installation manual and that the hood is properly installed so that the flapper stays closed all the way when not in use.  

The AQ4 powervent kit comes with a 5" to 4" reducer. This reducer fits right on top of the heater and then you would use 4" type B, C or stainless steel AL29-4C venting (not included) to go to the powervent motor.  There is a minimum of 2 feet of straight pipe required between the reducer and the blower motor.  Any venting (if needed) "after" the powervent motor must be 4" sealed stainless steel AL29-4C.  The Blower motor should be placed right at the opening where the termination hood with damper is to be installed on the sidewall of the home.

The AQ4 powervent kit is activated by a flow switch and gets attached to the cold water pipe on the right side of the unit just before it goes into the heat exchanger. 

The blower motor for the AQ4 has a new design and includes a delay setting that goes from #1 - #5 and this lets the installer set the blower motor so that when it senses flow it can be delayed for 1 - 5 seconds before the blower comes on.  This will help to ensure the pilot and burners light without getting sucked out by the blower motor. 

There is also a built in safety spill switch that gets attached to the tankless water heater and this will detect high temperatures from any flue gases in the case the blower motor does not activate and will shut the unit completely down.



Friday, January 11, 2013

$$ Special Sale on Bosch Vent Kits $$

We are pleased to announce a *very* special sale on all Bosch vertical and side-wall vent kits due to our large overstock position! We absolutely guarantee the lowest pricing on our vent kits and we will be happy to beat our competitor's pricing on any of the Bosch vent kits listed below!

We sell the AQ3ES Side-wall vent kit for the Bosch 940ES, 830ES, Evolution 500, 2700ES and 2400ES tankless water heaters. This is a 3" Category III stainless steel vent kit that contains all of the 3" venting parts needed to exhaust one of the above-mentioned tankless water heaters by going up and directly out the side wall.

We also carry our own AQ3ESPLUS kit which adds a set of WebStone 44443PR Isolation Valves and an 18" Auto-reset GFCI to the standard AQ3ES horizontal vent kit.

For those customers who are venting out a side wall that is perpendicular to the wall on which the Bosch tankless water heater is installed, we do offer the ESHCK-FULL-KIT -- a 3" Category III stainless steel concentric vent kit. This kit comes with the ESHCK concentric piece along with a 3" x 90 degree elbow, a 3" x 3' pipe and a 3" termination tee.

We carry the ES VVT through-the-roof vent kit for the Bosch 940ES, 830ES, Evolution 500, 2700ES and 2400ES tankless water heaters. This vertical vent kit contains all of the 3" Category III stainless steel venting parts needed to vent up through the roof except for the straight pipe, which is sold separately in pieces ranging in length from 6" up to 5'.

We also are the exclusive distributor for the ES VVT STEEP vent kit. In this kit we swap out the standard Adjustable Roof Flashing contained in the ESVVT vent kit for a Steep Roof Flashing at no extra charge.

We are the exclusive distributor for the AQ5EF side-wall vent kit for the Bosch 660EF tankless water heaters. This kit contains the true 2SVSWB03 Adaptor which you can only get through our company. The AQ5EF horizontal vent kit will also work with the Noritz NR-66 tankless water heater.

Looking to vent your Bosch 660EF or Noritz NR-66 through the roof? Just add the 2SVSWB03 Adaptor to either the ESVVT or ESVVT-STEEP vent kit!

Lastly, we carry the H/P VVT vertical vent kit for the Bosch 520PN, 520HN, 1600P, 1600H, GWH 425PN and certain 425HN tankless water heaters. (We also sell the AQ4 side-wall power vent kit for these same six heaters, but we are not overstocked on this part.)

The following vent kits are always in stock, but are not a part of our special sale pricing: the AQOK, BTOK and PTOK Bosch Outdoor Vent Kits and the Bosch Therm Concentric Vent Kit (196016). This latter concentric vent kit is made of PVC and is used only for the Bosch condensing tankless water heaters that are efficient enough to lower the exhaust temperature to a point where it is safe to vent through PVC.