New Cozy Furnace Model Numbers

Global Protankless Supply is an Authorized Distributor of Cozy gas furnaces.  Some of the Cozy furnaces come set for either Natural Gas (NG) or Liquid Propane (LP) and some Cozy furnaces come set for NG and would need a LP gas conversion kit to go to Liquid Propane.

The Cozy furnaces come in a variety of models to accommodate all homes and applications.  There are direct vent units, vented console heaters, floor furnaces and wall units.

Below is a list of the different types of furnaces and their respective model numbers.

COZY GRAVITY WALL FURNACES:

Operates without electricity, Convertible gas valves, Patented design increases efficiency, Available both NATURAL or PROPANE gas

C255H - Single Wall - 25K BTU (NG)

C355H - Single Wall - 35K BTU (NG)

C505H - Dual Wall - 50K BTU (NG)

C256H - Single Wall - 25K BTU (LP)

C356H - Single Wall - 35K BTU (LP)

C506H - Dual Wall - 50K BTU (LP)

COZY DIRECT VENT WALL FURNACES:

Equipped with Dexen 6003 Millivolt control valve. Includes standard vent assembly for 9" maximum wall thickness, wall thermostat, 20’ wire and insulated staples

CDV155D - 15K BTU (NG)

CDV255D - 25K BTU (NG)

CDV305D - 30K BTU (NG)

CDV156D - 15K BTU (LP)

CDV256D - 25K BTU (LP)

CDV306D - 30K BTU (LP)

COZY HIGH EFFICIENT DIRECT VENT WALL FURNACE:

Equipped with Maxitrol CV200 24-Volt Control Valve, wall thermostat, wire, staples & 9’ Power Cord. 

NOTE: Each carton includes standard vent cap for 5-32" wall thickness

HEDV253A - 25K BTU (NG) requires LP conv kit 49615 to go to LP gas

COZY DIRECT VENT COUNTERFLOW WALL FURNACES:

Equipped with Honeywell VR8200 series 24 volt control, wall thermostat, built-in

fan assembly and vent assembly.

DVCF403C - 40K BTU (NG) requires LP conv kit 49284 to go to LP gas

DVCF602D - 60K BTU (NG) requires LP conv kit 7732 to go to LP gas

COZY CONVENTIONAL VENT COUNTERFLOW WALL FURNACES:

Models require less than one square foot of floor space. They may be recessed into the stud space or surface mounted and vented vertically through the roof.

CF352E - 35K BTU (NG) requires LP conv kit 7718 to go to LP gas

CF502E - 50K BTU (NG) requires LP conv kit 7720 to go to LP gas

COZY VENTED ROOM HEATERS:

Equipped with Dexen 6003 Millivolt control valve, built-in thermostat, manual spark igniter, 100% safety pilot and vent safety shut off switch. All units feature top mounted thermostat for easy operation.

VC201C - 20K BTU (NG) requires LP conv kit 49722 to go to LP gas

VC352D - 35K BTU (NG)

VC351D - 35K BTU (LP)

VC502D - 50K BTU (NG)

VC501D - 50K BTU (LP)

COZY CHALLENGER FLOOR FURNACES:

Equipped with Honeywell VS821A1061 millivolt natural gas valve, wall thermostat and draft hood.

90N30A - 30K BTU (NG) requires LP conv kit 49200 to go to LP gas

90N50A - 50K BTU (NG) requires LP conv kit 49210 to go to LP gas 

90N65A - 62K BTU (NG) requires LP conv kit 49220 to go to LP gas

For more information or to place an order please call Global Protankless Supply at 866-289-4652.

Cozy Heating Systems

Global Protankless Supply is pleased to announce we are now carrying the full line of Cozy Heating Systems.  Cozy is a manufacturer of direct gas heating equipment known for our commitment to product quality. Designed to withstand the test of time, Cozy heaters are engineered for long-term comfort and dependability.  Cozy Heaters use the highest quality components and constructed by expert American craftsmen, we take pride in each and every product we produce. We are committed to providing comfortable living environments for single and multi-family homes, efficiency apartments, mobile homes, cottages, room additions, bedrooms, basements, garages, family rooms, or any application where space is at a premium.

Selecting a safe and reliable heater that suits your home or business is easier than you may think. We offer many different solutions to fit any space, from wall, floor furnaces, window-mounted and even free-standing models. How you heat your living space can mean the difference between a warm or a Cozy environment. Trust your heating needs to Cozy, the leader in zone heating equipment.

For further information or needing help picking out the right model please call Global Protankless Supply at 866-289-4652.

Replacing an Aquastar 240FX with Bosch Therm 830ES

The Aquastar model 240FX was a unit that was distributed by Controlled Energy Corporation (CEC) many years ago.  The 240FX was manufactured by Takagi and was capable of 2 major applications at one time. The Aquastar 240FX was a 165K BTU unit, took 4" single wall sealed galvanized or 4" single wall stainless steel venting.  The 240FX took it's combustion air from the area where it was installed.  The 240FX could sit right on the ground as the water and gas connections came out the left side of the unit.  Wall mounting was also an option.  The 240FX was suppose to be vented out the sidewall of the home for a maximum of 15' using the FXHood as the termination.  The Aquastar 240FX has been obsolete for some time and now most of the parts are no longer made also.

The closest replacement for the Aquastar 240FX is now the Bosch Therm 830ES.  The Bosch 830ES is a 175K BTU unit and is good for 2 major applications at one time.  The 3/4" water and gas connection are on the bottom of the unit vs the left side of the Aquastar 240FX.  The venting on the 830ES must be either 3" or 4" stainless steel single wall venting (AL29-4C) venting up through the roof or out the sidewall.  There is a vertical vent kit, ES VVT vertical vent kit avalable and also a sidewall vent kit, AQ3ES sidewall vent kit for venting out the side of the home.  The intake air for the 830ES is taken from the outside also using 3" PVC and should be taken from the same wall or roof the exhaust is going out through.  Please refer to the link above for more information on the Bosch Therm 830ES or call us at 866-289-4652 with questions.

  BOSCH THERM 830ES

New Bosch Greentherm C 950 ES Condensing Tankless Water Heater

The New Bosch Greentherm C 950 ES Condensing tankless water heater is a top performance, fully condensing gas tankless water heater from Bosch. This 175,000 BTU heater is designed for residential or commercial applications and can deliver hot water up to 140 degrees F with a 9.2 GPM flow rate.  Not approved for space heating applications.

This Energy Star approved tankless water heater can produce enough hot water for 2 major applications in most homes.  The Greentherm C 950 ES is now 93% energy efficient.

Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- well ahead of the 2012 Low NOX emissions standards set by SCAQMD (California -- South Coast Air Quality Management District).  The Greentherm C950ES now has NSF Certification (National Sanitation Foundation) for commercial kitchens.  The Bosch Green Therm C950ES now has an added bypass tube connecting the cold and hot water lines inside the unit so the heater can mix a little cold water with the hot to alleviate and fluctuations and maintan a more stable temperature.  Standard now also are three NTC temperature sensors. With a new sensor immediately after the HEX, the Greentherm achieves benchmark temperature control. The NTCs are no longer clipped on, but rather installed into the inlet and outlet pipes.

The Bosch Greentherm C 950 ES features an electronic ignition system and can vent through either 3 inch or 4 inch diameter PVC vent pipe either through the side wall or up through the roof.  The Greentherm C950ES now takes a new concentric venting system and attaches right to the top of the heater and takes its intake air and exhaust out through one hole to the outside.  The Greentherm C950ES can now be cascaded together with up to 4 units and they can all vent into one pipe using a special venting kit to the outside.  Installation can be done venting up to 4 units together into the one pipe having the heaters mounted side by side or back to back.  The combustion air for the units will need to be taken from the inside of the building.

The Bosch Greentherm C 950 ES comes with builtin freeze protection.  The Greentherm 950ES also comes with an external water filter screen.  The Bosch Greentherm C950ES does not come with a 3/4" pressure relief valve, this is an accessory that would have to be ordered seperately.

The freeze prevention kit is designed to provide protection for the water heater down to approximately 5°F for short term conditions only. It will not protect the appliance in areas where the temperature is routinely expected to be below freezing.  The freeze prevention kit will not protect plumbing outside the appliance from freezing.

The Bosch Greentherm C 950 ES comes with a limited 15 year warranty on the heat exchanger and 5 years on all other parts.  Service and labor costs are not covered.

Bosch Therm 660EF / 660EFO Tankless Water Heater Sale

For a limited time the Bosch Therm 660EF indoor tankless water heaters and Bosch Therm 660EFO outdoor tankless water heaters are on sale for a special low price. The Bosch 660EF/EFO heaters are 140,000 BTU direct vent tankless water heaters and they are available in both natural gas and propane models. They require 120V power for the fan forced exhaust.

The Bosch Therm 660EF indoor tankless water heaters require 3" single-wall stainless steel vent pipe and are designed to be vented either through the roof or out the side wall.

The following four models are available for same-day shipping:

• Bosch Therm 660EF-NG (Natural Gas)
• Bosch Therm 660EF-LP (Liquid Propane)
• Bosch Therm 660EFO-NG (Natural Gas)
• Bosch Therm 660EFO-LP (Liquid Propane)

Check out our special discounted pricing as these heaters are available at this reduced pricing while supplies last.

Also consider purchasing the following:

• Webstone EXP2 Isolation Valve Kit 44443PR
• Bosch Therm 660EF Remote Control
• 3" Stainless Steel Venting