Bosch Greentherm C950ES and C1050ES Discontinued

Bosch Thermotechnology has just discontinued the production of the Bosch Greentherm C950ES & C1050ES models.  These units came set for either Natural Gas (NG) or Liquid Propane (LP).  The Bosch C950ES & C1050ES have been discontinued to make way for the new Bosch Greentherm 9000 series heaters. 

Global Protankless Supply has a limited quantity of the Bosch Greentherm C950ES & C1050ES models.  Please call us to order while supplies last.

Bosch Greentherm C950ES NG (175K BTU)
Bosch Greentherm C950ES LP (175K BTU)
Bosch Greentherm C1050ES NG (199K BTU)
Bosch Greentherm C1050ES LP (199K BTU)

Global Protankless Supply is now carrying the new Bosch Greentherm T9800 & T9900 series tankless.  These models are condensing units and come in either 160K BTU or 199K BTU.  Please see some of the specifications below and links to the heaters.

Bosch Greentherm T9800SE 160
Bosch Greentherm T9800SE 199

• Comes in 160K BTU or 199K BTU
• Comes set for NG but has LP conversion kit included
• Top water connections
• built in flush ports at the bottom
• WiFi capability (Optional Accessory)
• Recirculation cable (Optional Accessory)
• Vents using PVC or PP 2", 3" or 4"

Bosch Greentherm T9900SE 160

Bosch Greentherm T9900SE 199 

• Comes in 160K BTU or 199K BTU
• Comes set for NG but has LP conversion kit included
• Top water connections
• built in flush ports at the bottom
• WiFi capability (Optional Accessory)
• Recirculation pump included
• Vents using PVC or PP 2", 3" or 4"

Please call Global Protankless Supply at 866-289-4652 with questions or to place an order.

Bosch Buderus Stainless Steel Boilers

Global Protankless Supply is now carrying the Bosch Buderus Stainless Steel Boilers (SSB).  These residential stainless steel Buderus boilers come in three different sizes ranging in BTU sizes of 85K BTU, 120K BTU and 160K BTU.

The three residential Bosch Buderus Stainless Steel Gas-Fired, Floor-Standing Condensing Boilers (SSBs) are designed with the same high-quality components found in our commercial stainless steel boilers, but in a compact space-saving design. All of the residential Bosch Buderus stainless steel boilers include integral pumps, built-in low water cut-offs, adjustable manual reset high limits, push-terminal wiring and a host of venting options.

In addition, the Buderus SSB residential boilers have the best price-performance and warranty in the market.  Below are some of the key features of the stainless steel boilers.

Bosch Buderus Stainless Steel Boiler (SSB)

Venting Options:

•Included adapter allows connection to PVC, CPVC, stainless steel, PP, and PP-Flex (M&G   Duravent  PolyPro and Centrotherm Innoflue)
•Single pipe, two pipe or concentric venting
•Sealed combustion or room air intake
•Horizontal or vertical termination
•Maximum vent lengths per pipe is 50 ft (2"), 60 ft (3") or 80 ft (4")

Controls:

•Buderus Residential boilers are equipped with Manual Reset High Limit and LWCO (low water cut   off) with test button.
•The Buderus SSB boiler can easily be connected to a room thermostat.
•Multiple boilers (up to 8) can be connected in cascade for increased heating capacity.
•Add an outdoor air temperature sensor to the boiler for an outdoor reset supply temperature control   for increased fuel efficiency and comfort.

Buderus SSB Models:

Bosch Buderus SSB 85 (SSB85)
Bosch Buderus SSB 120 (SSB120)
Bosch Buderus SSB 160 (SSB160)

Please call Global Protankless Suply at 866-289-4652 for further questions or to place an order.

Z-Flex Z-Dens 2" Concentric Horizontal & Vertical Vent Kits

Global Protankless Supply is now carrying the Z-Flex Z-Dens 2" Concentric Horizontal Kit (2ZDHK2) and also the Z-Dens 2" Concentric Vertical Kit (2ZDVK2).  The concentric horizontal and vertical vent kits are ULC-S636 listed polypropylene gas venting systems suitable for venting positive or negative pressure residential and commercial gas and oil fired Category II and IV condensing heating appliances with a maximum continuous flue gas temperature of 248°F (120°C).

There are several distinct advantages with the Z-Dens Concentric horizontal and vertical vent kits. This polypropylene piping is long lasting and easy to install as no cure time is required. Acidic flue gas condensate resistance provides a means of reducing boiler contamination. Lastly, in the event of expansion and contraction of the venting run, the Z-Flex Z-Dens venting eliminates the inherent dangers found with PVC/CPVC glued pipe joints.

Z-Flex Z-Dens 2" Concentric Horizontal Kit (2ZDHK2)

The Z-Flex Z-Dens 2" Concentric Horizontal Kit 2ZDHK2 comes with a concentric termination horizontal, adaptor collinear to concentric, 2 locking clamps & 2 Adaptors CPVC / PVC Coupling to PP.

Z-Flex Z-Dens 2" Concentric Vertical Kit (2ZDVK2)

The Z-Flex Z-Dens 2" Concentric Vertical Kit 2ZDVK2 comes with a concentric termination vertical, adaptor collinear to concentric, 2 locking clamps & 2 Adaptors CPVC / PVC Coupling to PP.

Global Protankless Supply also offer 2"/4" concentric venting straight pieces and elbows for additional vent length run.

The Z-Flex Z-Dens 2"/4" horizontal and vertical vent kits work well with the New Bosch Greentherm 9000 series gas tankless water heaters.  Please see the models listed below that work for the venting kits.

Bosch Greentherm T9900SEi 199
Bosch Greentherm T9900SE 199
Bosch Greentherm T9900SE 160
Bosch Greentherm T9800SE 199
Bosch Greentherm T9800SE 160

The Z-Dens 2"/4" Concentric Horizontal Vent Kit (2ZDHK2) is also available in 3"/4" (2ZDHK3) and 4"/6" (2ZDHK4).

The Z-Dens 2"/4" Concentric Vertical Vent Kit (2ZDVK2) is also available in 3"/4" (2ZDVK3) and 4"/6" (2ZDVK4).

For further questions please call Global Protankless Supply at 866-289-4652